Eachine LAL 5Style Overview

Posted by UpInTheSky on October 12, 2020 · 6 mins read

Eachine LAL 5Style 4S / Eachine LAL 5Style 6S is a 5 inch FPV Racing/Freestyle quadcopter; like its competitor, the iFlight Nazgul5 V2, it comes both in BNF (Bind aNd Fly) and PNP (Plug aNd Play) version. The BNF version offers two types of FrSky receivers:

  • FrSky R-XSR
  • Frsky XM+

This is ideal if you have a Taranis transmitter, like the Taranis X9D Plus SE 2019, which is one of the best transmitters at the moment. Otherwise, you can choose the PNP version (without receiver) so you can equip the Eachine LAL 5Style with your preferred receiver (for example, if you have a FlySky transmitter you can use the Flysky X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS, which is very good).

Eachine LAL 5Style Drone

Package Contents

  • LAL 5Style 220mm 4S Freestyle 5 Inch FPV Racing Drone
  • 4 * CW 5046 Propeller
  • 4 * CCW 5046 Propeller
  • Retail Box

Specifications

  • Drone weight: 395.20g (Without Battery)
  • FPV Camera: Caddx Ratel 1200TVL
  • Motors: Eachine 2307 1850KV 6S / 2450KV 4S
  • FC: LAL-F405 BT
  • ESCs: 50A 3-6S Blheli_32 DSHOT1200 4in1

Frame

The frame is an X carbon frame with the following dimensions:

  • Wheelbase: 225mm
  • Bottom plate: 2mm
  • Upper plate: 2mm
  • Arm plate: 5mm
  • X plate: 2mm

Eachine LAL 5Style Frame

There are a lot of TPU parts for protecting drone most delicate parts from impacts due to crashes:

Eachine LAL 5Style TPU Parts

FPV Camera

The FPV camera provided with the Eachine LAL 5Style is the Caddex Ratel 1200TVL, which is one of the best FPV camera on the market. Camera specs are reported here:

  • Lens: 2.1mm
  • Image Sensor: 1/1.8” Inch starlight HDR sensor
  • Horizontal Resolution: 1200TVL
  • FOV: 180 Degree
  • Min. Latency: 8ms
  • TV System: NTSC & PAL (changeable)
  • Image: 16:9 & 4:3 (changeable)
  • WDR: Super WDR (HDR)
  • Min. Illumination: Starlight
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio: > 60dB (AGC OFF)
  • Video Output: CVBS
  • Camera OSD: Separate OSD
  • DNR: 3-DNR
  • Day/Night: Auto/Color/B&W/EXT
  • Dimensions: 19mm * 19mm * 19mm
  • Wide Power Input: DC 5-40V
  • Work Temperature: -20℃ to +60℃
  • Work Humidity: 20% to 80%
  • Weight: 8g (N.W.)/ 40.5g (G.W.)

Eachine LAL 5Style FPV Camera

Motors and Propellers

The Eachine LAL 5Style mounts the Eachine 2307 1850KV 6S / 2450KV 4S motors. They are pretty powerful and beware that 6S ones drain batteries pretty rapidly.

Eachine LAL 5Style Motors

Motors are combined with 5046 Racestar 3-blade propellers.

ESCs and FC stack

The 4in1 ESCs is a 50A 3-6S loaded with Blheli_32:

Eachine LAL 5Style 4in1 ESCs

The Flight Controller is the LAL-F405 BT which is flashed with Betaflight 4.0.3 using DSHOT1200. Here are the specs:

  • Main control chip: STM32F405
  • IMU: MPU6000 (By SPI)
  • Input voltage: 2-6S
  • Firmware: MATEKF405
  • Barometer: BMP280
  • Integrated OSD , support DMA mode (use F4 MCU control OSD)
  • BEC: 5V/2A ; 10V/2A
  • Reserve MicroSD BlackBox
  • 5 serial ports and I2C interface are reserved to facilitate GPS access (Bluetooth occupies TX5.RX5)
  • Support receiver (PPM / DSM / IBUS / SBUS, SUMH, SUMD, SPEKTURM1024/2048, XBUS )
  • Supports programmable LED Sprit
  • Supported firmware: betaflight / cleanflight / inav
  • Reserved buzzer interface
  • BAT and CRT, can monitor battery voltage and current (need additional current sensor)
  • Install hole: 30.5 * 30.5mm
  • Weight: 5.9g

A very nice feature is the possibility to configure Betaflight using Speedy Bee App thanks to the built in bluetooth module on the FC. The stack is soft mounted, so mechanical vibrations are reduced and do not influence gyro readings.

Eachine LAL 5Style Stack

In order to avoid death rolls, it is a good idea to change digital idle from 2.5 to 5.5.

VTX

VTX equipped is the TX805, which is power switchable via TBS smart audio up to 800mW; it features MMCX connector for the 5.8GHz antenna.

Down below VTX specs are reported:

  • Channels: 40CH
  • Input voltage: 7V - 24V
  • 5V camera power: 120mA(MAX) -> 25mW@12V
  • 5V camera power: 200mA(MAX) -> 200mW@12V
  • 5V camera power: 300mA(MAX) -> 600mW@12V
  • 5V camera power: 350mA(MAX) -> 800mW@12V
  • Power supply: 5V / 3A output for Camera
  • Output power: 25mW/200mW/600/800mW switchable
  • Antenna connector: MMCX
  • Dimensions: 36 * 22 * 5mm 30.5 hole
  • Weight: 8g(Without antenna)

Eachine LAL 5Style VTX

Battery

Like all BFN/PNP configurations, battery is not included. The power cable wire for plugging in the battery is a 12AWG with XT60H connector.

A good choice for the 6S version is the TATTU 1300mAh 22.2V 75C 6S Lipo Battery. For the 4S version, a good option is the TATTU 1550mAh 14.8V 75C 4S Lipo Battery Pack.

HD Camera

Eachine LAL 5Style comes with TPU mount for GoPro Hero 5/6/7.

If you do not own a GoPro Hero and you are looking for a valid alternative, you can go for the Runcam 5, which can record FPV videos also in 4k@30fps (here you can find an overview of the camera).

Conclusions

Eachine LAL 5Style 4S / Eachine LAL 5Style 6S is a good BNF/PNP freestyle FPV drone and for that price probably you cannot find something better. It has some pretty decent components and it can be a valuable alternative to the iFlight Nazgul5 V2 4S / iFlight Nazgul5 V2 6S, which has certainly better specs, but it is more expensive.